
- De 2/3-type 2.2-megapixel 3CCD-camerasysteem biedt F12 (2000 lx) gevoeligheid, weinig vlekken en een uitstekende S/N-verhouding van 60 dB (op 59,94 Hz).
- Schakelbaar tussen 1080/59.94i en 1080/50i HD-formaten voor wereldwijd gebruik
- De nieuw ontwikkelde 16-bits A/D-converter en een 38-bits digitaal signaal verwerkingscircuit zorgen voor beeldverwerking met hoge kwaliteit.
- De DRS-functie (Dynamic Range Stretch) onderdrukt geblokkeerde schaduwen en blown highlights.
- De functies Film Rec Gamma en Scan omkeren bieden een krachtige ondersteuning in digitale bioscoopproductie.
- Beschikt over een interne digitale verlenging (x2 vergroting)
- 12-assen kleurcorrectie, detail, huidskleurdetail en matrixaanpassing
- Een SD-geheugenkaart kan worden gebruikt voor een upgrade van de firmwareversie.
AK-HCU200E
De camerabedieningseenheid AK-HCU200E zorgt voor een goedkope configuratie van een camerasysteem met een kwalitatieve transmissie via optische vezel over een lange afstand. De transmissie via optische vezel ondersteunt niet-gecomprimeerde videosignalen over een afstand van ongeveer 1.000 m tussen de camera en de camerabedieningseenheid. De compacte en lichte eenheid is 2 eenheden hoog en in een rack monteerbaar. Daarnaast heeft de AK-HCU200E een ingebouwde kruisconverter met ondersteuning voor 720p/59.94 en 720p/50.
Belangrijke functies/voordelen
1) Rendabel
2) Optische vezel transmissie
3) Klein formaat: Volledige grootte 2 rackeenheid
4) Formaat: 1080i/60(50), 720P/60(50) (2013/04)
5) IP-protocol (2013/04)
6) SD-kaartsleuf (voor het opslaan/oproepen van instellingen, versie hoger)
7) Afstand 1.000m (Camera naar CCU)
8) Autocue (er wordt één autocue-ingang geleverd als een standaardfunctie)
9) Geïntegreerde audio voor HD SDI-signaaluitgang
10) Webinstelling - De webinstelling kan gebeuren door het aansluiten van CCU met een pc voor CCU-instelling, toepassing en FPGA-programmering. Speciale jigtools en uitbreidingspaneel zijn niet nodig voor de upgrade.
11) Uitgang: SDI-UITGANG x 2, SDI-UITGANG (PM) x 2
12) RET-ingang (SDI: 2 kanalen, VBS: 1 kanaal)
AK-HRP200E
Het compacte bedieningspaneel AK-HRP200E kan IP-controle van de studiocamera AK-HC3800 ondersteunen. IP-controle kan ook worden gebruikt voor de afstandsbediening van compatibele Panasonic- en PTZ-camera's. De eenheid heeft een compact formaat van 6 eenheden en is uitgerust met een joystickbesturingshendel waarmee de iris en statief kunnen worden bediend.
Er zijn ook scènebestandsfuncties voorzien. Daarnaast is het AK-HRP200E afstandsbedieningspaneel uitgerust met een SD-geheugenkaartsleuf voor het opslaan van gebruikersbestanden en het bijwerken van de firmwareversie.
*Te ondersteunen tegen lente 2013
Belangrijke functies/voordelen
1) Compact formaat
2) Irisbediening van het joysticktype
3) IP-verbinding (lente 2013)
4) SD-kaart voor instellingen & versie hoger
5) Maximale kabelafstand van ROP naar CCU: 50m
AK-HVF70E
De AK-HVF70E is een 17,8cm LCD kleurviewfinder met een licht gewicht, een laag energieverbruik en veelzijdige assist-functies, zoals focus-in-rood en pixel-naar-pixel. Door de directe verbindingsfunctie is er geen aparte kabel nodig voor het aansluiten van de VF op de studiocamera.
Belangrijke functies/voordelen
1) Gewicht: 1,8kg
2) Resolutie: 1024 x 600 (WSVGA)
3) Focus assist-functies (focus-in-rood, pixel-naar-pixel)
4) Drie toewijsbare functietoetsen
5) Contrast, helderheid en peaking zijn aanpasbaar
6) Kantelhoek: 90° omhoog en 60° omlaag
Klik hier voor een lijst met downloadbare gebruiksaanwijzingen.
- Videos
- Afbeeldingen
- Casestudy’s
- Brochures
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
ALGEMENE SERVICE EN DOWNLOADS CONTACT OPNEMEN MET DE TECHNISCHE ONDERSTEUNINGPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
ALGEMENE SERVICE EN DOWNLOADS CONTACT OPNEMEN MET DE TECHNISCHE ONDERSTEUNINGThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
ALGEMENE SERVICE EN DOWNLOADS CONTACT OPNEMEN MET DE TECHNISCHE ONDERSTEUNINGThere are currently no other services available.
Specifications
Power Supply | 12 V DC (during external power supply operation) 190 V DC (when CCU is connected) |
---|---|
Power Consumption | 25 W (during external power supply operation, camera only) 53 W (maximum power during external power supply operation when maximum power supplied for each output connector while all accessories are connected) 60 W (maximum power when CCU is connected and maximum power supplied for each output connector while all accessories are connected) |
Operating Temperature | –10 °C to 45 °C (14°F to 113°F) Preheating required at temperatures below 0°C (32°F) |
Storage Temperature | –20 °C to 60 °C (–4°F to 140°F) |
Operating Humidity | 10 % to 85 % (no condensation) |
Weight | Approx. 3.7 kg (approx. 8.16 lb) |
Dimensions (W x H x D) | 135 mm x 260 mm x 367.5 mm (5-5/16 inches x 10-1/4inches x 14-7/16 inches) excluding protrusions |
Pickup Devices | 2/3 type 2.2 million pixel IT, CCD x 3 |
System | GBR pickup system |
Color Separation Optical System | f/1.4 prism |
Optical Filter | ND: Clear, 1/4, 1/16, 1/64 |
Lens Mount | Bayonet type |
Output Standard | SMPTE 292M |
Sensitivity | F11 (59.94 Hz) F12 (50 Hz) |
Horizontal Resolution | 1100 TV lines |
S/N | 60 dB or higher |
Output Format | 1080/59.94i, 1080/50i, 1080/23.98p(over59.94i), 25p(over50i), 1080/29.97p(over59.94i), 720/59.94p*1, 720/50p*1, 1080/23.98PsF*1 |
Horizontal Frequency | 33.716 kHz, 1125 line frame (59.94 Hz) 28.125 kHz, 1125 line frame (50 Hz) |
Vertical Frequency | 59.94 Hz or 50 Hz, interlace |
MIC Input | –60 dBu to 4 dBu (XLR 3-pin female x 2) Gain selected by camera menu |
HD-SDI Output | BNC x 2 (HD-SDI 1/HD-SDI 2) HD signal = 0.8 V [p-p], 75 Ω The HD-SDI 2 signal output can be added to the regular images using the camera menu item setting and switched to the VF or RET image output. |
Prompter Output | BNC x 1, VBS signal = 1.0 V [p-p], 75 Ω |
DC Out | 12 V, MAX. 1A |
RET Control Terminal | Round 6 pin x 1 |
VF | Round 20 pin x 1, D-Sub 29 pin x 1 |
Power Switching | CCU, OFF, EXT |
User 1/2/3 | Functions specified by menu items can be assigned to the switch. |
RET A/B Selection | For selecting the return signal |
RET/PTT Switching | RET, PPT |
Output Selection*2 | CAM, BAR, TEST |
White Balance Mode*2 | A, B, preset |
Shutter Speed Selection*2 | 59.94 Hz: 1/48 (23.98p), 1/60 (23.98p, 29.97p), 1/100, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000 50 Hz: 1/50 (25p), 1/60, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000 |
Intercom 2 | MIC ON/OFF, receiving level, or PGM level |
MIC Setting | MIC power, MIC gain, MIC1 selection |
Note | *1: The 720/59.94P, 720/50P and 1080/23.98PsF formats must be selected at the CCU. *2: When the CCU is connected, the selection functions cannot be used. Control is performed from the ROP. * When IP connection, 1080/29.97sF, 1080/50PsF, 720/59.94p, and 720/50p format are used, you may need to update AK-HC3800 firmware. For details, see the Panasonic website. http://pro-av.panasonic.net/ |