De camerabedieningseenheid AK-HCU200E zorgt voor een goedkope configuratie van een camerasysteem met een kwalitatieve transmissie via optische vezel over een lange afstand. De transmissie via optische vezel ondersteunt niet-gecomprimeerde videosignalen over een afstand van ongeveer 1.000 m tussen de camera en de camerabedieningseenheid. De compacte en lichte eenheid is 2 eenheden hoog en in een rack monteerbaar. Daarnaast heeft de AK-HCU200E een ingebouwde kruisconverter met ondersteuning voor 720p/59,94 en 720p/50.
- Afbeeldingen
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
ALGEMENE SERVICE EN DOWNLOADS CONTACT OPNEMEN MET DE TECHNISCHE ONDERSTEUNINGPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
ALGEMENE SERVICE EN DOWNLOADS CONTACT OPNEMEN MET DE TECHNISCHE ONDERSTEUNINGThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
ALGEMENE SERVICE EN DOWNLOADS CONTACT OPNEMEN MET DE TECHNISCHE ONDERSTEUNINGThere are currently no other services available.
Specifications
| Weight | Approx. 6.6 kg (approx. 14.6 lb) |
|---|---|
| Dimensions (W x H x D) | 424 mm x 88 mm x 400 mm (16-11/16 inches x 3-7/16 inches x 15-3/4 inches) Excluding protrusions |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Power Supply | 100 V to 240 V AC, 50Hz/60 Hz |
| Power Consumption | 170 W (Without CAMERA connected: 32 W) |
| Operating Humidity | 10 % to 90 % (no condensation) |
| Reference Input | 1 line (1 loop-through line) Black burst/tri-level*3 |
| Video Output | HD-SDI/SD-SDI: 4 lines (2 lines shared with picture monitor output*1) Analog composite: 1 line (1 line shared with picture monitor output*1) |
| Output Format | 1080/59.94i, 1080/50i, 1080/29.97PsF*2, 1080/25PsF*2, 1080/23.98PsF*2, 720/59.94p, 720/50p |
| Communication | Intercom input/output: 2 lines (1/2*1) (0 dBm, 600 Ω, RTS/4W*1) PGM: 1 line, input (0 dBm/600 Ω) Tally input: Red, Green, 1 input each |
| Return Input | HD-SDI/SD-SDI: 2 lines (switched depending on the setting) VBS: 1 line |
| Prompter Input | 1 line, Analog composite |
| Intercom | XLR, 5-pin, female Input: –55 dBu to –10 dBu Output: 100 mW (max.) |
| LAN Port | 1 line (8-pin, RJ45) |
| Note | *1: Depending on the setting, only one of them can be selected at one time. *2: The 1080/29.97PsF, 1080/25PsF and 1080/23.98PsF formats must be selected at the camera. *3: The black burst signal and tri-level sync signal of the reference input are recognized automatically. |
| Capacity for Supplying Power to a Camera | 190 V DC, 0.6 A |
| Microphone Output | 2 lines (XLR, 3-pin, male), 0 dBm/600 Ω |
| ROP Interface | RS-422, 1 line, 12 V output |
| MSU Interface | RS-422, 1 line, GPI for control |
