Main product image
BACK TO PRODUCT CATEGORY
WJ-ND400 DISCONTINUED
Belangrijkste functies

Multi-indeling H.264, MPEG-4 en JPEG

Maximaal 64 netwerkcamera’s

Verschillende opnamemodi
  • MPEG-4 en JPEG multiformaat
  • Tot 64 netwerkcamera's
    • Camera's kunnen worden toegewezen aan een van de 8 groepen voor gemakkelijker bladeren.
    • 2x, 4x digitale zoom (Live/afspelen)
    • Tot 16 clients tegelijk kunnen beelden bewaken en de WJ-ND400 bedienen
    • De WJ-ND400 is een netwerkrecorder met harde schijf met hoge prestaties, specifiek ontwikkeld om te voldoen aan de behoeften van megapixelcamera-opnamen waar een hoge gegevensdoorvoer en een grote opslagcapaciteit is vereist.
    • Grote opslagcapaciteit

    64 netwerkcamera's kunnen worden aangesloten op de WJ-ND400 en hun beelden en geluid kunnen simultaan worden opgenomen. De NVR heeft 9 seriële ATA HDD-sleuven, terwijl elke optionele uitbreidingseenheid ook 9 seriële ATA HDD-sleuven bevat voor extra capaciteit. Hierdoor is de WJ-ND400 ideaal voor bewakingssystemen op grote schaal. Dankzij de hot plug-ondersteuning kunnen schijven worden vervangen zonder enige uitvaltijd, waardoor gebruik 24/7 mogelijk is.

Betrouwbaar

Voor een hoge betrouwbaarheid, ondersteunt de WJ-ND400 RAID 5/6; mogelijkheid tot opslaan van beeldgegevens op meerdere HDD's (minimum 4 HDD's vereist). Als een HDD (of twee stations voor RAID 6) defect is, kunnen opnamen worden hersteld vanaf de resterende HDD's zonder enig gegevensverlies. De eenheid bevat ook een geïntegreerd besturingssysteem en gegevenscodering.

Veelzijdig

De WJ-ND400 is compatibel met zowel MPEG-4 als JPEG en maakt veelzijdige opnamefuncties mogelijk, zoals handmatige, geplande, nood-, gebeurtenisopname en externe timeropname. Hierdoor beschikt u over ongeëvenaarde flexibele opnameopties. Met een bereik van alarmacties, inclusief alarmopname, e-mailmelding, alarmbericht, terminaluitgang, FTP-overdracht en camerapositionering, garandeert de recorder dat de gebruikers van het systeem niet geen enkele moment missen.

Om opnamen te zoeken, biedt de intelligente VMD-functie de mogelijkheid snel te zoeken naar een beweging in een opgegeven gebied in de opgenomen beelden. Daarnaast kan de gefilterde zoekfunctie een opname zoeken op tijd en datum, gebeurtenistype en cameranummer.

Er zijn twee netwerkinterfaces voorzien op de recorder waarmee het clientnetwerk kan worden gescheiden van het cameranetwerk. Hierdoor bent u zeker dat de netwerkprestaties van de camera niet worden beïnvloed door gebruikers die het systeem bewaken. Dit kan ook dienst doen als een extra beveiligingsmaatregel waardoor camera's kunnen worden geplaatst in een afzonderlijk netwerk dat alleen toegankelijk is via de NDR.

Lage installatiekosten

Wanneer de i-Pro-netwerkcamera's zijn aangesloten op de WJ-ND400, kunnen hun IP-adressen gemakkelijk worden verkregen via de eenvoudige IP-installatiefunctie. Door de tijd en het werk die nodig zijn voor de netwerkinstelling te verminderen, verlaagt de eenvoudige IP-instelling de installatie- en onderhoudskosten.

 

 

Technologie

Click an icon to find out more about the technology used

H264 MPEG4 JPG Onvif Logo Profiles S CMYK
  • Brochures
Product
Image Data
Marketing
Brochures
Technical
Firmware
Release Notes

Service and Support
  • Catalogue Vertical Solution No.2 Transportation
    Catalogue Vertical Solution No.2 Transportation
    No.5A-002D, 4th Edition, PDF data
    Tue, 20/03/2018 - 09:19
    Download pdf - 9.25 MB
    Catalogue Vertical Solution No.4 Logistics
    Catalogue Vertical Solution No.4 Logistics
    No.5A-004A, 1st Edition, PDF data
    Tue, 20/03/2018 - 09:19
    Download pdf - 4.59 MB
  • WJ-ND400 Firmware
    WJ-ND400 Firmware
    NTSC/PALHow to Upgrade the recorder (Click here for detail)  ​​​​​​Latest version note:Procedures how to upgrade firmware from Ver. 4.50 to Ver. 4.59, or Ver. 4.50/4.59 to Ver. 5.00 (or newer)  (Click here for detail)Previous version note:Restrictions on firmware version 5.01- Live picture may delay approx. 2 sec. while resolution setting for camera were 4M(2048x2048 pixel).- Live picture may be collapsed depends on a load on PC.- 4-screen live picture to be displayed I-Frame only while setting FHD(1920x1080 pixel) or greater resolution.- Up to 6Mbps of bitrate or SXVGA resolution (1280x960 pixel) can be backed up on SD memory card.- Attachment file (Jpeg) of an alarm notification must be 1MB or less.- 1MB or bigger image by FTP periodical transmission from camera, may be collapsed.Restrictions on "Normal" mode. - Maximum bitrate for Live, recording and playback is up to 6Mbps.Restrictions on "4K resolution" mode.- Up to 8 units (must be CH1 to CH8) of 9 Megapixel 360-degree Network Camera (14Mbps or more) can be used.Or, supports 14Mbps on CH1 to CH8 and 8Mbps on CH9 to CH64.- Number of users for playback reduces from 16 to 8.- Playing back video (8Mbps or more) with audio may be a cause of interruption at a timing of refreshment of video.- Number of users for FTP transmission reduces from 8 to 4.- Impossible to download data that is 2GB or more by FTP or HTTP. Please accept downloading service for version 5.00 is unavailable due to an issue and use version 5.01 instead.We apology any inconvenience due to this. Notes on "ND400_V450.zip" and "ND400_V459.zip"1. There are 2 files of firmware version 4.5, one is version 4.50, named "ND400_V450.zip" and the other is version 4.59, named "ND400_V459.zip". Please refer to the Version history carefully to find which file is appropriate for your WJ-ND400(K).2. Both version 4.50 and 4.59 are latest, either version 4.50 or 4.59 is NOT older/newer than the other version.Note on "ND400_V412.zip" (Uploaded on October 14, 2014).We removed "ND400_V412.zip" and placed "ND400_V421.zip" because the file name of "ND400_V412.zip" was incorrect. The "ND400_V412.zip" contained the version 4.21.
    Tue, 14/08/2018 - 09:32
    Download zip - 19.01 MB

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

ALGEMENE SERVICE EN DOWNLOADS CONTACT OPNEMEN MET DE TECHNISCHE ONDERSTEUNING

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

ALGEMENE SERVICE EN DOWNLOADS CONTACT OPNEMEN MET DE TECHNISCHE ONDERSTEUNING

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

ALGEMENE SERVICE EN DOWNLOADS CONTACT OPNEMEN MET DE TECHNISCHE ONDERSTEUNING

There are currently no other services available.

Specifications

Supported Cameras Panasonic i-PRO series Network cameras (Contact Panasonic for BB series and Axis® cameras)
Supported Image Format H.264, MPEG-4, JPEG, M-JPEG
Supported Image Resolution Aspect ratio [4:3] : 2,048 x 1,536, 1,280 x 960, 960 x 720, 800 x 600, 640 x 480, 320 x 240 Aspect ratio [16:9]:1,920 x 1,080, 1,280 x 720, 640 x 360, 320 x 180) * Depending on the camera
Supported Audio Format G.726 (ADPCM) 32 kbps
Maximum Number of Cameras 64
Recording Mode Manual, Schedule including Event (Pre/Post), Emergency
Pre-Event Recording Up to 15 minutes with dedicated HDD for Pre-Event. Shorter Pre-Event recording is possible without dedicated HDD.
Scheduled Recording Mode 8 programs, 6 time zones/day, Independent setup for each day of the week
Frame Rate/Camera Up to 30 ips (Depending on the Camera)
Camera Control (Browser GUI) Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode
REC/Playback Control (Browser GUI) REC, PLAY, Rev PLAY, Pause, Stop, FF, REW, Prev Record, Next Record, Prev Image, Next image, Goto Date, Goto Last (5 sec. ~ 5 min.)
Search Mode (Browser GUI) Filtered search: Time date, Event type, Camera number VMD search: one detection areas per search (works with supported i-PRO cameras and WJ-NT314)
Display Mode (Browser GUI) Spot/Quad (16 patterns) / Spot Sequence / Quad Sequence (Sequence: Live only)
Camera Grouping (Browser GUI) 8 groups each with 16 characters title
Image Download (Browser GUI) Recorded data of selected camera and time range can be downloaded to a PC. Viewer software can be downloaded separately.
SD Memory Data Download (Browser GUI) Images recorded in the SD card in the i-PRO series cameras can be transferred to the recorder automatically.
Copy (Browser GUI) Recorded data of selected cameras and time date range can be copied to the COPY partition.
Camera Title (Browser GUI) On the browser, Up to 16 Characters
Clock Display (Browser GUI) On the browser. Time: 12 H/24 H, Date: 3 formats (YY.MM.DD, MMM.DD.YY, DD.MMM.YY)
Alarm Control (Browser GUI) Reset, Suspend
Digital Zoom (Browser GUI) 2x, 4x
System Log (Browser GUI) Operator access (100), Network error (1,000), Error (100), Event (750)
System Setup (Browser GUI) Setup page in English, French, Italian, Spanish, German, Russian, Chinese, Japanese
GUI Language (Browser GUI) English, French, Italian, Spanish, German, Russian, Chinese, Japanese, Custom
Supported OS Microsoft® Windows® 7,Microsoft® Windows Vista®,Microsoft® Windows® XP SP3 The language of OS must be the same as selected GUI language.
Supported Browser Windows® Internet Explorer® 9.0 (32 bit),Windows® Internet Explorer® 8.0 (32 bit), Windows® Internet Explorer® 7.0 (32 bit),Microsoft® Internet Explorer® 6.0 SP3
Required PC [JPEG/ MPEG-4] CPU: Intel® Pentium® 4 3.0 GHz or faster, RAM: 1 GB or more, VRAM: 128 MB or more (Min. 64 MB), Microsoft® DirectX® 9.0c or later [H.264] CPU: Intel® CoreTM i7-920 or faster, RAM: 3 GB or more, VRAM: 128 MB or more (Min. 64 MB), Microsoft® DirectX® 9.0c or later
Alarm Source (Alarm/Event) 32x Terminal inputs, 64x Camera alarms, Panasonic Alarm Protocol
Event Mode (Alarm/Event) Off / On
Alarm Action (Alarm/Event) Alarm recording, e-mail notification, Alarm message, Camera positioning, FTP image transfer, Terminal output, Panasonic alarm protocol output, Buzzer, Indicator
Alarm Control (Alarm/Event) Reset, Suspend
Event Log (Alarm/Event) 750
Network Interface Camera port: 10Base-T / 100Base-TX / 1000Base-T (RJ-45) Client port: 10Base-T / 100Base-TX / 1000Base-T (RJ-45) Maintenance port: 10Base-T (RJ-45)
Maximum Band Width Total 200 Mbps
Bandwidth Control (Client Port) 32 K / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M / 5 M / 10 M (bps) and unlimited
Supported Protocol TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, RTP
E-mail Upon Alarm or Warning
FTP Client Upon alarm or Periodic transfer
No. of Simultaneous Users 16
User Registration Up to 32 users
User Level 4 Levels (Programmable)
Partitioning (Network) User - Camera (View only, View & Control, No Access)
Security Method User authentication (ID and password), Host authentication (IP address), Alteration detection, HTTP Port No. (1 ~ 65,535 except for reserved numbers), FTP Port No. (1 ~ 65,535 except for reserved numbers)
Alarm Connector (25 Pin D-Sub) [Alarm] Alarm input 1 ~ 7, 17 ~ 32
Alarm/Control Connector (25 Pin D-Sub) [Alarm] Alarm input 8 ~ 16, 1x Alarm output, 1x Alarm reset input, 1x Alarm suspend input [Control] Emergency recording input, Power outage detection input, External recording mode switching, Power outage recovery completion output, Time adjustment input/output, +5 V output [Error/Warning] Network error output, Available disk space warning output, HDD error output, Camera error output, Error output
External Storage High-speed serial interface 1.5 Gbps (theoretical value) Only for WJ-HDE400 Extension Unit
Time Synchronization Terminal (Master or Slave), NTP (Server/Client)
Summer Time User definable (using menu setup)
Type 3.5 inch Serial ATA HDD, Up to 9x HDDs can be installed.
Maximum Capacity 54 HDD slots (with 5x WJ-HDE400 Extension Units, 9x HDDs installed in each unit)
RAID RAID 5/6 supported
Partitioning (HDD) Normal / Event / Pre-Event / Copy
Playback Control Play, Rev Play, Pause, FF, REW, Prev Record, Next Record, Prev Image, Next image
Additional Functions Alteration detection, Save as JPEG, Two times zoom, Print
Supported OS, Language Same as browser GUI, Language of the software will be English
Safety/EMC Standard UL (UL60065), FCC (Part15 ClassA), C-UL (CAN/CSA C22.2 No.60065), DOC (ICES003 ClassA) CE (EN60065, EN55022 ClassB, EN55024), GOST (GOST R 51558)
Power Source 120 V AC, 60 Hz 220 ~ 240 V AC, 50 Hz
Power Consumption approx. 170 W
Ambient Operating Temperature +5 C ~ +45 C (41 F ~ 113 F)
Ambient Operating Humidity 5 % ~ 90 % (no condensation)
Maximum Operating Altitude 2,000 m (6,500 feet) above sea level
Dimensions 430 mm (W) x 132 mm (H) x 400 mm (D) (16-15/16" (W) x 5-3/16" (H) x 15-3/4" (D)) (excluding rubber feet and projections)
Weight 13 kg (28.6 lbs.) without Canister and HDD 20 kg (44.15 lbs.) with 9 HDDs